• <strong id="0sWBUZJ"></strong>
    1. <q id="0sWBUZJ"><style id="0sWBUZJ"></style></q>

        1. <abbr id="0sWBUZJ"><em id="0sWBUZJ"></em></abbr>

              IEC 60335-2-2- Clause 21.101 Current-Carrying Hoses Crushing Resistance Test Apparatus

              The hose is placed between two aprallel steel plates each having a length of 100mm, a width of 50mm and the edges of the longer sides rounded with a radius of 1mm. The axis of the hose is positioned at right angles to the longer sides of the plates. The plates are placed at a distance of approximately 350mm from one end of the hose.
              Description

              Product Description:

              Name:IEC 60335-2-2- Clause 21.101 Current-Carrying Hoses Crushing Resistance Test Apparatus

              Type:BND-EA004


              Test Procudures (Extracted from IEC 60035-2-2:2019 clause 21.101):

              The hose is placed between two aprallel steel plates each having a length of 100mm, a width of 50mm and the edges of the longer sides rounded with a radius of 1mm. The axis of the hose is positioned at right angles to the longer sides of the plates. The plates are placed at a distance of approximately 350mm from one end of the hose.

              The steel plates are pressed together at a rate of 50mm/min± 5mm/mim until the applied force is 1.5kN. The force is them re;leased and the electric strength test is carried out between the conductors connected together and the saline solution.


              Standards:

              Our tester complies with several international standards:

              IEC 60335-2-2 clause 21.101

              IEC 62368-1:2018 clause 4.8.4.6

              IEC60065:2014 clause 12.7.3.6


              Main Technical Parameters:

              FeatureDescription
              Control ModePLC control with a touch screen human-machine interface for intelligent operation.
              Test StationSingle station setup.
              Frame StructureConstructed from electrophoretic aluminum alloy with a sprayed steel plate seal, featuring an upper and lower structure where the lower part houses the control components and the upper part serves as a gantry test operating table.
              Tester DriveEquipped with a servo reduction motor.
              Extrusion PressureMaximum pressure capacity of 1.5KN.
              Pressurization SpeedAdjustable speed of 50±5mm/min.
              Platen SpecificationsMade from steel with dimensions of length 100mm, width 50mm, and fillet radius R1mm.
              Force Value AccuracyUses an S-type force value sensor with an accuracy of ±1%.
              Equipment Power SupplyAC220V 50Hz.


              Features:

              1. Precision Measurement: Utilizes a precision digital pressure sensor for accurate and intuitive pressure measurement.

              2. Compact Design: Features a small desktop structure that occupies minimal space and can be conveniently placed on a test workbench.

              3. Stable Operation: Incorporates a servo reduction motor and PLC touch screen control for stable and reliable operation.


              PZRthjavascript:void();
            1. <strong id="0sWBUZJ"></strong>
              1. <q id="0sWBUZJ"><style id="0sWBUZJ"></style></q>

                  1. <abbr id="0sWBUZJ"><em id="0sWBUZJ"></em></abbr>