• <strong id="0sWBUZJ"></strong>
    1. <q id="0sWBUZJ"><style id="0sWBUZJ"></style></q>

        1. <abbr id="0sWBUZJ"><em id="0sWBUZJ"></em></abbr>

              MT10 SDI-12 Output Soil Temperature And Moisture Sensor

              We designed the MT-10 to measure the water content, electrical conductivity, and temperature of soil. The MT-10 uses an oscillator running at 70 MHz to measure the dielectric permittivity of soil to determine the water content. A thermistor in thermal contact with the sensor prongs provides the soil temperature. The Polyurethane coating on the MT-10 circuit board protects the components from water damage and gives the sensor a longer life span.
              Description

              Product Description:

              Name:MT10 SDI-12 Output Soil Temperature And Moisture Sensor

              Type:BND-MT10

              We designed the MT-10 to measure the water content, electrical conductivity, and temperature of soil. The MT-10 uses an oscillator running at 70 MHz to measure the dielectric permittivity of soil to determine the water content. A thermistor in thermal contact with the sensor prongs provides the soil temperature. The Polyurethane coating on the MT-10 circuit board protects the components from water damage and gives the sensor a longer life span.


              Specifications

              Volumetric Water Content

              Range: 0 (air) to 100 (water)


              Temperature

              Range: -40 to 80 ℃

              Resolution: 0.01 ℃

              Accuracy:±0.5 ℃


              General

              Dimensions: 10 cm (1) x 3.2 cm (w) x 0.7 cm (d)

              Prong Length: 5.2 cm

              Dielectric Measurement Frequency: 70 MHz

              Measurement Time: 150 ms (milliseconds)

              Power requirements: 3.6 to 30 VDC, 0.3mA quiescent, 10mA during 150 ms measurement


              Output: SDI-12 / RS485 MODBUS RTU

              Operating Temperature: -40 to 80 ℃

              Connector Types: 3.5 mm (stereo) plug or stripped & tinned lead wires (Pigtail)

              Cable Length: 5 m standard; Maximum 75 m. Please contact if you need longer cable lengths.


              PHYSICAL CHARACTERISTICS

              SENSOR NAME

              MT10

              DIMENSIONS

              10 cm X 3.2 cm

              CABLE LENGTH

              5 meters

              * Custom cable lengths are available for an additional cost.


              Type Selections

              Code number

              Code

              Code info.

              Code1:model

              MT10


              Code2:Measurement parameters

              A

              B

              Soil moisture, Soil temperature(SDI-12)

              Soil moisture, Soil temperature, soil electrical conductivity (EC). Three parameter measurement(RS485 ONLY)

              Code3:

              Soil moisture range

              A

              0-100%

              Code4:

              Electrical conductivity range(RS485 ONLY)

              A

              B

              C

              D

              0-5000us/cm (RS485 ONLY)

              0-10000us/cm(RS485 ONLY)

              0-20000us/cm(RS485 ONLY)

              NONE

              Code5:

              CONNECTION TYPES

              A

              B

              PIGTAIL CABLE

              STEREO CABLE (SDI-12 ONLY)

              Code6:Output

              A

              B

              SDI-12

              RS485 MODBUS RTU

              Code 7:cable lengths

              005

              XXX

              5 meters

              Custom, XXX is an arbitrary length (unit: m)

              Model example:

              MT10 Sensor, Soil moisture, Soil temperature, soil moisture range is 0-100%, interface SDI-12, connection type is STEREO CABLE, 5 meters cable length.

              Type selection code:MT10 - A A D B A 005

              jjIUCjavascript:void();
            1. <strong id="0sWBUZJ"></strong>
              1. <q id="0sWBUZJ"><style id="0sWBUZJ"></style></q>

                  1. <abbr id="0sWBUZJ"><em id="0sWBUZJ"></em></abbr>